Thermoelastic contact problem for a cylindrical sliding bearing of dry friction with a thin two-layered brass
UDC
539.3: 621.822Abstract
The approximate solution of the thermoelastic contact problem for a cylindrical sliding bearing with a deformable two-layer bush is obtained. It is assumed that the bearing is heated up as a result of heat generation in the contact region due to the forces of Coulomb friction, though forces of friction themselves are not taken into account when determining contact pressure. The action of thermal isolation on the strained-deformed state of the two-layer bearing brass was investigated.
Keywords:
cylindrical bearing, dry friction, bilayer sleeve, contact pressure, heat transfer, antifriction layerAcknowledgement
References
- Колесников В.И. Теплофизические процессы в металлополимерных трибосистемах. М.: Наука, 2003. 279 с.
- Александров В. М., Губарева Е. А. Решение термоупругих контактных задач для цилиндрического и сферического подшипников скольжения // Трение и износ. 2005.Т. 26. №4. С. 347-357.
- Бабешко В.А., Ворович И.И. К расчету контактных температур, возникающих при вращении вала в подшипнике // ПМТФ. 1968. №2. С. 135-137.
- Александров В. М., Губарева Е. А. О расчете контактных температур, возникающих при вращении вала в подшипнике // Трение и износ. 2007. Т. 28. №1. С. 39-43.
- Александров В. М., Бабешко В.А., Белоконь А.В. Контактная задача для кольцевого слоя малой толщины // МТТ. 1966. №1. С. 135-139.
- Коваленко Е. В., Евтушенко А.А. Износ подшипника скольжения с учетом тепловыделения от трения // Трение и износ. 1993. Т. 14. №2. С. 259-269.
Downloads
Submitted
Published
How to Cite
Copyright (c) 2008 Ivanochkin P.G.
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.