Nonlinear bending and stability of ellipsoidal reverse buckling disks being under the liquid pressure and temperature

Authors

  • Ganeeva M.S. Institute of Mechanics and Engineering, Kazan Science Center, Russian Academy of Sciences, Kazan, Российская Федерация
  • Moiseeva V.E. Institute of Mechanics and Engineering, Kazan Science Center, Russian Academy of Sciences, Kazan, Российская Федерация
  • Skvortsova Z.V. Institute of Mechanics and Engineering, Kazan Science Center, Russian Academy of Sciences, Kazan, Российская Федерация

UDC

539.37

Abstract

The nonlinear bending and stability of reverse buckling disks have been studied. The reverse buckling disks represent the oblate ellipsoidal shells being under the pressure of the heated or cooled compressed working environment on the convex side of the shells. We have obtained the numerical results depending on the temperature of the working environment. Comparison of the studied ellipsoidal shells with the spherical segments having the same base and depth of pole under the base was also presented. It was found that the biggest critical loads are observed at low temperatures with a significant reduction of their values at elevated temperatures for oblate ellipsoidal shell under the joint action of pressure of the compressed gas and its temperature. Herein, the loads of wave formation in a parallel for all the considered values of temperature are not observed. It is shown that oblate hemi-ellipsoidal shell provides an axisymmetric form of stability loss with the opening of their central part at low temperature and at the same temperature of the loading environment. This is consistent with the operating conditions of the safety reverse buckling disks. It is shown that small changes in geometry lead to a significant change in the stress-strain state and in stability of the considered shells.

Keywords:

reverse buckling disks, ellipsoidal shell, nonlinear bending, temperature, pressure

Author Infos

Muzayna S. Ganeeva

д-р физ.-мат. наук, главный научный сотрудник лаборатории механики сплошной среды Института механики и машиностроения Казанского научного центра РАН

e-mail: ganeeva@kfti.knc.ru

Valeriya E. Moiseeva

канд. физ.-мат. наук, старший научный сотрудник лаборатории механики сплошной среды Института механики и машиностроения Казанского научного центра РАН

e-mail: ganeeva@kfti.knc.ru

Zara V. Skvortsova

канд. физ.-мат. наук, ученый секретарь Института механики и машиностроения Казанского научного центра РАН

e-mail: zara-skvortsova@yandex.ru

References

  1. Olhovskij N.E. Predokhranitelnye membrany [Protective Membranes]. Moscow: Chemistry Publ., 1976, 149 p. (In Russian)
  2. Pavlov V.V., Belikov N.V., Iudin A.S., Kakurin A.M., Zanimonets U.M. Ustrojstvo dlya izgotovleniya hlopayushchih predohranitel'nyh membran [Device for the manufacture of reverse buckling disks]. Patent RF na izobretenie No. 2353456. Opublikovano 27.04.2009. Byul. No. 12. [RF patent for the invention No. 2353456. Published on 27.04.2009. Bull. No. 12.] (In Russian)
  3. Kovalenko A.D. Osnovy termouprugosti [Foundations of Thermoelasticity]. Kiev, Naukova Dumka Publ., 1970, 307 p. (In Russian)
  4. Thornton E. A. Thermal buckling of plates and shells. Appl. Mech. Rev., 1993, vol. 46, no. 10, pp. 485-506.
  5. Ganeeva M.C. Termosilovaya zadacha v geometricheski i fizicheski nelineinoi teorii netonkikh i tonkikh obolochek [Temperature and Force Problem in Geometrically and Physically Nonlinear Theory of Thin and Non-Thin Shells]. Kazan, Kazan Physicotechn. Inst. Kazan Branch USSR Acad. Sci., 1985, Available from VINITI, 1985, no. 4459-85. (In Russian)
  6. Ganeeva M.S., Moiseeva V.E., Skvortsova Z.V. Reverse Buckling Disks under Liquid Pressure and Temperature. J. of Machinery Manufacture and Reliability, 2014, vol. 43, no. 6, pp. 482-489. DOI: 10.3103/S1052618814050069
  7. Ilgamov M.A. Staticheskie zadachi gidrouprugosti [Static Problems of Hydroelasticity]. Kazan, Ime KazSc RAS, 1994, 208 p. (In Russian)
  8. Ganeeva M.S., Kosolapova L.A. O sootnosheniiakh zakona Guka v temperaturnoi zadache uprugogo tverdogo tela [About Hooke's Law Relations in the Temperature Problem of Elastic Solid]. Trudy XVII Mezhd. konf. po teorii obolochek i plastin [Proceedings of the XVII Int. Conf. on the Theory of Shells and Plates]. Kazan, Kazan State University Publ., 1996, vol. 1, pp. 33-37. (In Russian)
  9. Iliushin A.A. Plastichnost. Ch. I. Uprugoplasticheskie deformatcii [Plasticity. Part I. Elastic-plastic deformations]. Moscow, Leningrad, Gostehteorizdat Publ., 1948, 376 p. (In Russian)
  10. Ganeeva M.S., Ilgamov M.A., Moiseeva V.E. Ustoichivost' sfericheskogo segmenta, nagruzhennogo davleniem szhimaemoi zhidkosti [Stability of spherical segment loaded by the force of compressed liquid], Problemy prochnosti i plastichnosti. Mezhvuzovskii sbornik (Strength and Plasticity Problems. Interuniversity Collection of Papers), Nizhniy Novgorod, Lobachevsky State University of Nizhniy Novgorod, 2009, iss. 71, pp. 71-76. (In Russian)

Issue

Pages

21-27

Submitted

2017-05-15

Published

2017-06-30

How to Cite

Ganeeva M.S., Moiseeva V.E., Skvortsova Z.V. Nonlinear bending and stability of ellipsoidal reverse buckling disks being under the liquid pressure and temperature. Ecological Bulletin of Research Centers of the Black Sea Economic Cooperation, 2017, no. 2, pp. 21-27. (In Russian)