About the features of resources of defective bearings
UDC
539.3DOI:
https://doi.org/10.31429/vestnik-16-2-15-20Abstract
The discovery of a new type of cracks, complementing Griffith-Irwin cracks, put forward the problem of a more detailed study of the state of products, namely bearings, which have the risk of acquiring crack type defects. Since this process can occur at the stage of operation of the product, the question arises of its resource before achieveing the conditions for its safe replacement. In the paper by means of an example of conventional models of bearings, the properties of a bearing with a defective coating are studied. The model is a deformable material of the bearing race in the form of a layer, having a coating with a crack, which has a thin lubricating layer of liquid on top. The fluid layer is exposed to the effect of vertical pressure from above from the bearing itself. The properties of contact stresses in the zone of the defect are investigated with allowance for external influences.
Keywords:
block element, plates, topology, exterior forms, block structures, boundary problems, hidden defects, bearingsAcknowledgement
References
- Kragel'skiy, I.V., Dobychin, M.N., Kombalov, V.S. Osnovy raschetov na trenie i iznos [Basics of calculations for friction and wear]. Mashinostroenie, Moscow, 1977. (In Russian)
- Maugis, D. Contact adhesion and rupture of elastic solids. Springer Verlag, Berlin, 2000.
- Goryacheva, I.G. Mekhanika friktsionnogo vzaimodeystviya [Mechanics of friction interaction]. Nauka, Moscow, 2001. (In Russian)
- Goryacheva, I.G., Dobychin, M.N. Kontaktnye zadachi v tribologii [Contact problems in tribology]. Mashinostroenie, Moscow, 1988. (In Russian)
- Goryacheva, I.G., Makhovskaya, Yu.Yu. Modelirovanie treniya na raznykh masshtabnykh urovnyakh [Simulation of friction at different scale levels]. Izvestiya Rossiyskoy kademii nauk. Mekhanika tverdogo tela [Proc. of the Russian Academy of Science. Solid mechanics], 2010, no. 3, pp. 117–127. (In Russian)
- Nozdrin, M.A., Makhovskaya, Yu.Yu., Sheptunov, B.V. Raschet deformatsionnoy sostavlyayushchey sily treniya pri skol'zhenii tela po vyazkouprugomu osnovaniyu [Calculation of the deformation component of the friction force when sliding a body on a viscoelastic base]. Vestnik Ivanovskogo gosudarstvennogo energeticheskogo universiteta [Bulletin of Ivanovo State Energy University], 2009, no. 3, pp. 48–50. (In Russian)
- Aleksandrov, V.M., Goryacheva, I.G., Torskaya, E.V. Prostranstvennaya zadacha o dvizhenii gladkogo shtampa po vyazkouprugomu poluprostranstvu [Spatial problem on the motion of a smooth stamp on a viscoelastic half-space]. Doklady Akademii nauk [Rep. of Russian Academy of Sciences], 2010, vol. 430, no. 4, pp. 490–493. (In Russian)
- Kuznetsov, Ye.A. Effect of fluid lubricant on the contact characteristics of rough elastic bodies in compression. Wear, 1985, vol. 102, iss. 3, pp. 177–194.
- Babeshko, V.A., Babeshko, O.M., Evdokimova, O.V. Ob odnom novom tipe treshchin, dopolnyayushchikh treshchiny Griffitsa–Irvina [One new type of cracks, supplementing the crack of the Griffith–Irwin]. Doklady Akademii nauk [Rep. of Russian Academy of Sciences], 2019, vol. 485, no. 2, pp. 34–38. DOI: 10.1134/S102833581903004210 (In Russian)
- Babeshko V.A., Evdokimova O.V., Babeshko O.M. On the possibility of predicting some types of earthquake by a mechanical approach. Acta Mechanica, 2018, vol. 229, iss. 5, pp. 2163–2175. DOI: 10.1007/s00707-017-2092-0
- Babeshko, V.A., Evdokimova, O.V., Babeshko, O.M. On a mechanical approach to the prediction of earthquakes during horizontal motion of litospheric plates. Acta Mechanica, 2018, vol. 229, iss. 11, pp. 4727–4739. DOI: 10.1007/s00707-018-2255-7
Downloads
Submitted
Published
How to Cite
Copyright (c) 2019 Evdokimova O.V., Babeshko V.A., Babeshko O.M., Evdokimov V.S., Akinina M.M., Eletskiy Yu.B., Uafa S.B.
This work is licensed under a Creative Commons Attribution 4.0 International License.
