About the features of resources of defective bearings

Authors

  • Evdokimova O.V. Southern Scientific Center, Russian Academy of Science, Rostov-on-Don, Russian Federation
  • Babeshko V.A. Kuban State University, Krasnodar, Russian Federation
  • Babeshko O.M. Kuban State University, Krasnodar, Russian Federation
  • Evdokimov V.S. Southern Scientific Center, Russian Academy of Science, Rostov-on-Don, Russian Federation
  • Akinina M.M. Southern Scientific Center, Russian Academy of Science, Rostov-on-Don, Russian Federation
  • Eletskiy Yu.B. Southern Scientific Center, Russian Academy of Science, Rostov-on-Don, Russian Federation
  • Uafa S.B. Southern Scientific Center, Russian Academy of Science, Rostov-on-Don, Russian Federation

UDC

539.3

EDN

ZUPSDZ

DOI:

10.31429/vestnik-16-2-15-20

Abstract

The discovery of a new type of cracks, complementing Griffith-Irwin cracks, put forward the problem of a more detailed study of the state of products, namely bearings, which have the risk of acquiring crack type defects. Since this process can occur at the stage of operation of the product, the question arises of its resource before achieveing the conditions for its safe replacement. In the paper by means of an example of conventional models of bearings, the properties of a bearing with a defective coating are studied. The model is a deformable material of the bearing race in the form of a layer, having a coating with a crack, which has a thin lubricating layer of liquid on top. The fluid layer is exposed to the effect of vertical pressure from above from the bearing itself. The properties of contact stresses in the zone of the defect are investigated with allowance for external influences.

Keywords:

block element, plates, topology, exterior forms, block structures, boundary problems, hidden defects, bearings

Funding information

Отдельные фрагменты работы выполнены в рамках реализации Госзадания Минобрнауки на 2019 г. (проекты 9.8753.2017/8.9), ЮНЦ РАН на 2019 г. (проект 00-18-04) № госрег. 01201354241, программ президиума РАН I-16 (проект 00-18-21) и I-52 (проект 00-18-29), и при поддержке грантов РФФИ (проекты 19-41-230003, 19-41-230004, 19-48-230014, 19-08-00145, 17-08-00323, 18-08-00465, 18-01-00384, 18-05-80008).

Authors info

  • Olga V. Evdokimova

    д-р физ.-мат. наук, главный научный сотрудник Южного научного центра РАН

  • Vladimir A. Babeshko

    академик РАН, д-р физ.-мат. наук, заведующий кафедрой математического моделирования Кубанского государственного университета, директор Научно-исследовательского центра прогнозирования и предупреждения геоэкологических и техногенных катастроф Кубанского государственного университета, заведующий лабораторией Южного федерального университета

  • Olga M. Babeshko

    д-р физ.-мат. наук, главный научный сотрудник научно-исследовательского центра прогнозирования и предупреждения геоэкологических и техногенных катастроф Кубанского государственного университета

  • Vladimir S. Evdokimov

    студент Кубанского государственного университета, лаборант Южного научного центра РАН

  • Maria M. Akinina

    младший научный сотрудник Южного научного центра РАН

  • Yuri B. Eletskiy

    заведующий лабораторией Южного научного центра РАН

  • Samir B. Uafa

    младший научный сотрудник Южного научного центра РАН

References

  1. Крагельский И.В., Добычин М.Н., Комбалов В.С. Основы расчетов на трение и износ. М.: Машиностроение, 1977. 526 с. [Kragel'skiy, I.V., Dobychin, M.N., Kombalov, V.S. Osnovy raschetov na trenie i iznos [Basics of calculations for friction and wear]. Mashinostroenie, Moscow, 1977. (In Russian)]
  2. Maugis D. Contact adhesion and rupture of elastic solids. Berlin: Springer Verlag, 2000.
  3. Горячева И.Г. Механика фрикционного взаимодействия. М.: Наука, 2001. 478 с. [Goryacheva, I.G. Mekhanika friktsionnogo vzaimodeystviya [Mechanics of friction interaction]. Nauka, Moscow, 2001. (In Russian)]
  4. Горячева И.Г., Добычин М.Н. Контактные задачи в трибологии. М.: Машиностроение, 1988. 256 с. [Goryacheva, I.G., Dobychin, M.N. Kontaktnye zadachi v tribologii [Contact problems in tribology]. Mashinostroenie, Moscow, 1988. (In Russian)]
  5. Горячева И.Г., Маховская Ю.Ю. Моделирование трения на разных масштабных уровнях // Изв. РАН. МТТ. 2010. № 3. С. 117–127. [Goryacheva, I.G., Makhovskaya, Yu.Yu. Modelirovanie treniya na raznykh masshtabnykh urovnyakh [Simulation of friction at different scale levels]. Izvestiya Rossiyskoy kademii nauk. Mekhanika tverdogo tela [Proc. of the Russian Academy of Science. Solid mechanics], 2010, no. 3, pp. 117–127. (In Russian)]
  6. Ноздрин М.А., Маховская Ю.Ю., Шептунов Б.В. Расчет деформационной составляющей силы трения при скольжении тела по вязкоупругому основанию // Вестник ИГЭУ. 2009. № 3. С. 48–50. [Nozdrin, M.A., Makhovskaya, Yu.Yu., Sheptunov, B.V. Raschet deformatsionnoy sostavlyayushchey sily treniya pri skol'zhenii tela po vyazkouprugomu osnovaniyu [Calculation of the deformation component of the friction force when sliding a body on a viscoelastic base]. Vestnik Ivanovskogo gosudarstvennogo energeticheskogo universiteta [Bulletin of Ivanovo State Energy University], 2009, no. 3, pp. 48–50. (In Russian)]
  7. Александров В.М., Горячева И.Г., Торская Е.В. Пространственная задача о движении гладкого штампа по вязкоупругому полупространству // ДАН. 2010. Т. 430. № 4. С. 490–493. [Aleksandrov, V.M., Goryacheva, I.G., Torskaya, E.V. Prostranstvennaya zadacha o dvizhenii gladkogo shtampa po vyazkouprugomu poluprostranstvu [Spatial problem on the motion of a smooth stamp on a viscoelastic half-space]. Doklady Akademii nauk [Rep. of Russian Academy of Sciences], 2010, vol. 430, no. 4, pp. 490–493. (In Russian)]
  8. Kuznetsov Ye.A. Effect of fluid lubricant on the contact characteristics of rough elastic bodies in compression // Wear. 1985. Vol. 102. Iss. 3. P. 177–194.
  9. Бабешко В.А., Бабешко О.М., Евдокимова О.В. Об одном новом типе трещин, дополняющих трещины Гриффитса–Ирвина // ДАН. 2019. Т. 485. № 2. C. 34–38. DOI: 10.1134/S102833581903004210 [Babeshko, V.A., Babeshko, O.M., Evdokimova, O.V. Ob odnom novom tipe treshchin, dopolnyayushchikh treshchiny Griffitsa–Irvina [One new type of cracks, supplementing the crack of the Griffith–Irwin]. Doklady Akademii nauk [Rep. of Russian Academy of Sciences], 2019, vol. 485, no. 2, pp. 34–38. DOI: 10.1134/S102833581903004210 (In Russian)]
  10. Babeshko V.A., Evdokimova O.V., Babeshko O.M. On the possibility of predicting some types of earthquake by a mechanical approach // Acta Mechanica. 2018. Vol. 229(5). P. 2163–2175. DOI: 10.1007/s00707-017-2092-0
  11. Babeshko V.A., Evdokimova O.V., Babeshko O.M. On a mechanical approach to the prediction of earthquakes during horizontal motion of litospheric plates // Acta Mechanica. 2018. Vol. 229. Iss. 11. P. 4727–4739. DOI: 10.1007/s00707-018-2255-7

Downloads

Download data is not yet available.

Issue

Pages

15-20

Section

Mechanics

Dates

Submitted

May 22, 2019

Accepted

May 25, 2019

Published

June 28, 2019

How to Cite

[1]
Evdokimova, O.V., Babeshko, V.A., Babeshko, O.M., Evdokimov, V.S., Akinina, M.M., Eletskiy, Y.B., Uafa, S.B., About the features of resources of defective bearings. Ecological Bulletin of Research Centers of the Black Sea Economic Cooperation, 2019, т. 16, № 2, pp. 15–20. DOI: 10.31429/vestnik-16-2-15-20

Similar Articles

1-10 of 470

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>